Skip to product information
1 of 5

Deus

Deus Vera 18 MK2

Deus Vera 18 MK2

Login to view price

RRP: $10,000

Requires DEUS AMP2.2500 (can run two VERA MK2 subs)

No grill

Overview

DEUS VERA MK2 - BASS RELOADED

The Vera 18 MK2 is a shallow-depth ultra-high-fidelity subwoofer built for cinema and media rooms where depth is at a premium. At under 12 inches deep, it fits behind acoustically transparent screens and into tight equipment spaces without giving up the low-frequency extension and control expected from a full-depth cinema subwoofer. That performance comes from MASS Drive™, a proprietary motor topology engineered entirely in-house to hold BL, KMS, and inductance flat and controlled through the full driver stroke — even inside that shallow enclosure. MK2 carries this same performance forward while making the platform easier to build and deploy at scale.

What’s new in MK2

  • Optimized motor construction — 3D-printed titanium components replace carbon-fiber layup, with no performance sacrifice.

  • Improved internal airflow for better heat dissipation and quieter operation at maximum output.

  • Updated premium finish to ensure that the aesthetics match the performance.

  • Optimized carbon fiber cone layup to maximize performance while improving manufacturing yield.

  • New manufacturing partnership dramatically reduces production cost while improving quality.

Application

High performance home cinema, production studios, screening rooms, and media rooms.

Recommended Configuration

One or more per space depending on SPL targets — behind the screen, or as part of a Wave Forming or Dirac ART distributed bass layout.

Engineered as a complete system

The Vera 18 MK2 is designed around the two-channel AMP2.2500, driving one Vera 18 MK2 per channel. As with every Deus subwoofer, TrueTemp thermal monitoring provides real-time closed-loop thermal feedback to the amplifier as part of the robust limiter system. All limiters use a side-chain monitoring system to avoid clipping and overshoot, and include monitoring for excursion, voltage, voice coil temperature, and rate of thermal change, so the system can be run hard with confidence. See the AMP2.2500 page for full details.

Details

  • MASS Drive™ proprietary motor topology — engineered entirely in-house to hold BL, KMS, and inductance flat and controlled through the full driver stroke, delivering the most linear performance possible even inside Vera 18’s shallow enclosure.

  • Klippel-validated driver and motor performance, confirming that linearity in mass production.

  • Shallow-depth enclosure (under 12 in) for straightforward integration behind acoustically transparent screens or in tight equipment spaces.

  • TrueTemp direct voice coil temperature measurement — real, physically measured coil temperature, not an estimate.

  • Constrained-Layer-Damping (CLD) enclosure with front and rear panels coupled through a dedicated motor mount for a stiff, low-coloration structure.

  • Sealed alignment, 12 dB/octave acoustic rolloff — works naturally with in-room gain for deep-bass extension.

Specifications

Preliminary Specs

Performance

Power Handling 2,500 W peak / 2,000 W continuous
Impedance (per coil) 3.40 ohm
DCR
Coil Configuration Single voice coil
Sensitivity 87.5 dB
2.83v/1m, 2π anechoic
Max SPL (Peak) 122.8 dB
1m, 2π, anechoic, CTA-2010-B
Max SPL (Continuous) 119.8 dB
1m, 2π, anechoic, CTA-2010-B
Frequency Response (-3dB) 30.0Hz – 230Hz
No DSP
Frequency Response (-3dB) 23.0Hz – 230Hz
With Linkwitz Transform
Low Frequency Extension (-3dB) 23.00Hz
With Linkwitz Transform
Low Frequency Extension (-6dB) 18.80Hz
With Linkwitz Transform
Low Frequency Extension (-10dB) 14.40Hz
With Linkwitz Transform
Cone Breakup Frequency 409Hz
Xmax 26 mm / 1.02 in
One way, 82% BL
Group Delay at f3 11.9 ms
With Linkwitz Transform
System Qtc 0.6
With Linkwitz Transform
Enclosure Alignment Sealed
Low Frequency Rolloff 12dB/oct

CTA 2010 data

Frequency Amp Voltage (RMS) 1m Peak 2m Peak 2m RMS
12.5 Hz 53.4V 105.5 dB 99.5 dB 96.5 dB
16 Hz 62.0V 111.2 dB 105.2 dB 102.2 dB
20 Hz 79.9V 116.0 dB 110.0 dB 107.0 dB
25 Hz 84.6V 119.8 dB 113.8 dB 110.8 dB
31.5 Hz 84.6V 121.7 dB 115.7 dB 112.7 dB
40 Hz 84.6V 122.0 dB 116.0 dB 113.0 dB
50 Hz 84.6V 122.1 dB 116.1 dB 113.1 dB
63 Hz 84.6V 122.8 dB 116.8 dB 113.8 dB
80 Hz 84.6V 122.7 dB 116.7 dB 113.7 dB
100 Hz 84.6V 122.8 dB 116.8 dB 113.8 dB
125 Hz 84.6V 123.4 dB 117.4 dB 114.4 dB
160 Hz 84.6V 124.3 dB 118.3 dB 115.3 dB
200 Hz 84.6V 125.0 dB 119.0 dB 116.0 dB

Measured at 2m, others calculated, powered by AMP2.2500.

Design

I/O Neutrik SpeakOn NL4 for audio, XLR for thermal data
Cables (Included) 50' 4-conductor 12ga with dual Neutrik SpeakOn NL4 connectors (custom lengths available), 50' XLR for thermal data
Integrated Proprietary Technologies MASS Drive™ proprietary motor topology, TrueTemp direct voice coil temperature measurement, Constrained-Layer-Damping (CLD) enclosure with front and rear panels coupled through a dedicated motor mount
Patents Pending
Mounting Sits on ground, integrated mounting points for custom brackets to connect speakers together in stacks or arrays, or to couple them to the structure
Warranty (Default / With Registration) 3 years / 5 years
Dimensions (Metric) 585 mm × 585 mm × 294 mm
Dimensions (Imperial) 23.0 in × 23.0 in × 11.57 in
Shipping Dimensions (Crated, Imperial) TBD
Weight (Net, Assembled) 87 lbs / 39.5 kg
Weight (Gross, Shipping) TBD

Documentation

Return to product overview ↑

View full details