The Vantage M (medium) is the middle-sized speaker within the Vantage Series. Created under the same philosophy as the other products in the range - to have the same scale of sound among all sizes. As the Vantage B is devoted for short listening distances, or the Vantage S for normal distances but for smaller rooms; the Vantage M is devoted to being used in an everyday environment with 30-100 sq m room (or bigger if acoustically treated). Despite being from the "big speaker breed" the Vantage M can look and feel like a smaller speaker in a large room due to its clever design, but it punches with attitude which will remind you immediately that they are most certainly anything but small in performance.
FEATURES
The Vantage M is designed around a 6” wideband midrange driver, supported by a customized beryllium tweeter. Accompanied by a 10" down-firing aluminum cone subwoofer and two front firing 6.5” paper woofers.
As a standard in AudioSolutions products, the mini horn is introduced here to enhance tweeter performance by lowering distortions and raising efficiency in critical regions.
The Vantage M is equipped with an adjustable crossover allowing you to make level corrections, depending on your listening taste or simply to tame a room. Level corrections are limited to a 2.5db window, preventing any tonal disbalance, but making a big impact if one needs to balance the speakers>audio equipment>room combo. The whole network is based only on extremely low conductance resistors, meaning that only the sound level will change when a knob is turned.
The cabinet, decorated with a highly durable topcoat made from crushed stone and polyurethane lacquer, gives the speaker durability and a visual effect of matte surface with glittering particles. It's a very unique and stylish accent which gives off the look of broken stone pieces.
Never used before top-grade 3D vinyl is used to decorate the back and cut-out of the sidewall. Concerns were raised about the durability of such material during the design phase, but damage tests proved that this material is actually tougher than any veneer, leather, or even paint.
SPECIFICATIONS
Dimensions (HxWxD) : 1421 mm x 460 mm x 650 mm; 56 x 18.1 x 25.6in
Weight : 75 kg/165 lbs each
Sensitivity : 92 dB @ 2.83V 1m
Recommended power amplifier : 50-500 W rms
Impedance : nominal 4,0 ohms;
Crossover frequency : 50, 200, 8000 Hz
Frequency response (in-room environment) : 21-30000 Hz
Drivers : 2,5 cm beryllium dome tweeter, 17 cm Egyptian Papyrus mid, two 18 cm SPC paper bass drivers, 26 cm aluminum woofer
